Maintenance for Artificial Sports Fields
We repair seems, cut the turf and sink holes for the low price of $0.06 per square foot.
We also can replace your artificial courts with the lowest prices in Southern California starting at $4.25 to $5.00 per square foot depending on the product.
Keep It Clean
Rainfall is the best cleanser. In areas where rainfall is scarce, an occasional water flush is beneficial to cleanse the turf. For lightly soiled areas, it may be necessary to sponge mop with a five (5) percent solution of low sudsing household detergent in hot water followed by a thorough rinsing with hot water.
For heavily soiled areas, repeat procedure for lightly soiled areas follow with sponge mopping using a three (3) percent solution of household ammonia in hot water followed by a thorough rinsing with hot water.
The first rule is promptness. It is always easier to clean up a fresh spill than one that has dried and hardened. Remove any solid or paste-like deposit with a spatula or table knife. Blot up excess liquids with paper towels, a clean cloth, or a dry absorbent, such as kitty litter or fuller’s earth. Dry absorbents can then be swept or vacuumed up afterwards.
Synthetic fibers have good resistance to staining. However, it is important to realize they are only one part of a sophisticated system of various components designed for overall performance. Some cleaning agents safe for the face fibers can be harmful to other components of the turf system. Therefore, cleaning agents are grouped into two sets, one of which can be used in liberal amounts directly on the turf surface, and the second of which should only be applied by rubbing a cloth soaked in the cleaner in order to minimize penetration of possible harmful agents below the turf surface.
The frequency for suggested brushing is directly related to the amount of foot traffic you have in your turf area. Matting of fibers may occur in areas of high foot traffic, especially if fibers have become soiled with dirt and other airborne pollutants.
Periodic “cross brushing” of the turf can help restore the aesthetic appearance of the turf . “Cross brushing” means all brushing activity takes place against the grain, nap, or sweep of the turf fibers. By brushing against the turf, the fibers are “fluffed up”. A brush with synthetic bristles should be used. Never use a brush with metal or wire bristles as these will change the turf fibers.
Take note to heavier trafficked areas for matting of fibers that might appear different than other areas that do not see heavy traffic. Brushing these areas is highly recommended as it will ensure the full life of your lawn. Brushing cannot hurt the turf, so brush as often as needed, again keeping in mind that the more traffic, the more frequent the brushing.
We replace synthetic turf for less!
We also offer maintenance for turf fields and residential yards.